產品名稱HTL2500
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW2500 | ||
| L款規格 | SPCIFICATION | CN | HTL2500 | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 180 | 200 | 210 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 24 | 24 | 24 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 28501 | 35186 | 38775 |
| 注射重量 | Injection weight(ps) | g | 25935 | 32019 | 35285 |
| 注射速率 | Injection rate | g/s | 1523 | 1880 | 2000 |
| 注射壓力 | Injection pressure | Mpa | 175 | 142 | 128 |
| 螺桿轉速 | Screw speed | rpm | 53 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 25000 | ||
| 移模行程 | Open stroke | mm | 1900 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 1850×1700 | ||
| 最大模厚 | Max.Mold height | mm | 1800 | ||
| 最小模厚 | Min.Mold height | mm | 700 | ||
| 頂出行程 | Ejector stroke | mm | 450 | ||
| 頂出力 | Ejector stroke | KN | 490 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 45+45+55+55 | ||
| 電熱功率 | Heating power | KW | 170.9 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 18.50×4.10×4.3 | ||
| 油箱容積 | Olitank cubage | L | 3100 | ||
| 機器重量 | Machine weight | t | 180 | ||
