產品名稱HTL140
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW140 | ||
| L款規格 | SPCIFICATION | CN | HTL140 | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 38 | 42 | 45 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 22.1 | 20 | 18.6 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 193 | 235 | 270 |
| 注射重量 | Injection weight(ps) | g | 176 | 213 | 246 |
| 注射速率 | Injection rate | g/s | 94 | 115 | 132 |
| 注射壓力 | Injection pressure | Mpa | 205 | 170 | 147 |
| 螺桿轉速 | Screw speed | rpm | 190 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 1400 | ||
| 移模行程 | Open stroke | mm | 380 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 410×410 | ||
| 最大模厚 | Max.Mold height | mm | 450 | ||
| 最小模厚 | Min.Mold height | mm | 160 | ||
| 頂出行程 | Ejector stroke | mm | 120 | ||
| 頂出力 | Ejector stroke | KN | 50 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 13 | ||
| 電熱功率 | Heating power | KW | 7.9 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 4.48×1.11×1.90 | ||
| 油箱容積 | Olitank cubage | L | 270 | ||
| 機器重量 | Machine weight | t | 4.0 | ||
