產品名稱HTL160
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW160 | ||
| L款規格 | SPCIFICATION | CN | HTL160 | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 42 | 45 | 50 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 23.6 | 22 | 19.8 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 305 | 350 | 432 |
| 注射重量 | Injection weight(ps) | g | 277 | 319 | 393 |
| 注射速率 | Injection rate | g/s | 138 | 160 | 196 |
| 注射壓力 | Injection pressure | Mpa | 203 | 177 | 143 |
| 螺桿轉速 | Screw speed | rpm | 180 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 1600 | ||
| 移模行程 | Open stroke | mm | 435 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 460×460 | ||
| 最大模厚 | Max.Mold height | mm | 520 | ||
| 最小模厚 | Min.Mold height | mm | 180 | ||
| 頂出行程 | Ejector stroke | mm | 135 | ||
| 頂出力 | Ejector stroke | KN | 45 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 18.5 | ||
| 電熱功率 | Heating power | KW | 12.5 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 4.86×1.30×2.10 | ||
| 油箱容積 | Olitank cubage | L | 300 | ||
| 機器重量 | Machine weight | t | 6 | ||
